• Health and Safety Violations

  A company in England has been fined £67,000 after a young employee died

  Posted by Nigel on 6 February 2024 at 6:33 pm

  A company in Peterborough has been fined £67,000 after a young employee lost his life.

  George Setchfield was found unconscious over the side of a large container while working for Electrostatic Magic Limited at the firm’s site in Peterborough.

  The 21-year-old had entered the company’s stripping shed, which housed an Intermediate Bulk Container (IBC) containing alloy wheel stripper.

  He was later found by his manager slumped over the side of the IBC, and could not be revived.

  George had sustained multiple organ failure and chemical pneumonitis and cutaneous burns from exposure to dichloromethane, hydrofluoric acid and methanol.

  The Health and safety Executive (HSE) found that Electrostatic Magic Limited had failed to control exposure to dichloromethane and hydrofluoric acid.

  It would have been reasonably practicable for the company to have installed local exhaust ventilation (LEV), used a hoist or long-handled tools to lower and lift parts in and out of the tank, provide pumped chemical systems to prevent the need to lean into the IBC and finally ensure that any Personal Protective Equipment (PPE) or Respiratory Protective Equipment (RPE) provided was suitable for the environment it was being used in.

  Electrostatic Magic Limited pleaded guilty to breaching Regulation 7(1) of the Control of Substances Hazardous to Health Regulations 2002 and Article 67 of the REACH regulation. (REACH stands for registration , evaluation, authorisation and restriction of chemicals).

  The company was fined £67,000 and ordered to pay £7,231 in costs at Peterborough Magistrates’ Court on 19 January 2024.

  HSE Inspector Tom Pouncey said: “Our thoughts today are with the family of Mr Setchfield, a young man, who should have returned home safely to his family at the end of his working day, but because of the failings of Electrostatic Magic Limited, he did not, and his family are understandably heartbroken.”

  “Awareness within the alloy wheel stripping industry of the importance of using appropriate control measures and the dangers of this cold stripping process needs to improve.

  “Companies need to understand the dangers of working with hazardous chemicals and ensure employees are not unnecessarily exposed. Deaths can result from working with Dichloromethane-based stripping fluids.

  “HSE will be inspecting businesses carrying out similar work to ensure suitable health and safety arrangements are in place. If they are not then HSE will take appropriate action.”

  Nigel replied 2 months, 2 weeks ago 1 Member · 0 Replies
• 0 Replies

Log In to Reply